TUCANA-02 M Manual End Milling Machine

TUCANA-02-M-Manual-End-Milling-Machine Main
TUCANA-02 M Manual End Milling Machine 1
TUCANA-02 M Manual End Milling Machine 3
TUCANA-02-M-Manual-End-Milling-Machine Main
TUCANA-02 M Manual End Milling Machine 1
TUCANA-02 M Manual End Milling Machine 3

Tucana-02 M is a manual end milling machine. It has pneumatic twin clamps and air gun among standard equipment, whereas custom cutter stacks and profile fixtures among  optional equipment.

ATech Machine’s horizontal end-millers are specially designed for milling sets of profiles (both aluminum and vinyl) in which the cutter unit needs to be changed several times in the same set.

 

 

Standard Equipment
  • Air gun
  • User’s manual,
  • Pneumatic twin clamps
Optional Equipment
  • Custom cutter stacks
  • Profile fixtures

 

Technical Table
Technical Features Imperial
1.2 HP 1-Phase 110V 60 Hz 3000 rpmd=1.18″ D=Max.6.34″3.5″6″90-120 psi 0.2 CFM19x23x44″132 lbs
Technical Features Metric
 
800W 230V 50Hz 3000 rpm 1200W 400V 50Hz 3000 rpmd=30 mm D=Max.16190 mm150 mm6-8 Bar 5 l/min47x58x112 cm″60 kg
Manual End Milling Machine

Tucana-02 M is a manual end milling machine. It has pneumatic twin clamps and air gun among standard equipment, whereas custom cutter stacks and profile fixtures among  optional equipment.

ATech Machine’s horizontal end-millers are specially designed for milling sets of profiles (both aluminum and vinyl) in which the cutter unit needs to be changed several times in the same set. Machine is equipped with a quick-release cutter holder making different applications on profiles quicker and easier. In addition to that, the cutting zone is fully guarded to protect the operator in all the machining operations.

 

The machine has been designed in accordance with CE, UL and CSA Safety Directives. You can have further information about the Tucana-02 M at ATechMachinery.com, watch demonstration videos, or read its detailed technical catalog and part lists.

 

Our horizontal end-millers are specially designed for milling sets of profiles (both aluminum and vinyl) in which the cutter unit needs to be changed several times in the same set.Machine is equipped with a quick-release cutter holder making different applications on profiles quicker and easier

The cutting zone is fully guarded to protect the operator in all the machining operations.