NIS-05 Pneumatic Outer Corner Cleaning Tool

Video

NIS-05 is a pneumatic outer corner cleaning tool. It is easy to use with a specially designed stainless knife. It cleans off welding seams in either hot or cold condition. It can clean the outer corner seams after welding. It has a 22,000 RPM motor, and is featured to cut from end point and side surface. Extra router bits are optional. It can have an inscription of your contact information to give away as a gift. It weighs 0.8 kg (1.8 lb) and measures 8 x 7 x 25 cm (3” x 3” x 10”). It has an air pressure of 6-8 bar (90-120 psi).

Easy to use with specially designed stainless knife.
Cleans off welding seams in hot or cold condition.
Cleans outer corner seams after welding.
Has a 22000 rpm motor
Featured to cut from end point and side surface.
Cleans outer sections of the seams very easily.

Hand tool
1 router bit

Extra router bit
Can be inscripted with your contact information to give away as a gift

Weight = 0.8 kg (1.8 lb)
LWH = 8 x 7 x 25 cm   (3” x 3” x 10”)
Air = 6-8 bar (90-120 psi)

Technical specifications and features are subject to change without prior notice.