NIS-04 Pneumatic Inner Corner Cleaning Apparatus

Video

NIS-04 is a pneumatic inner corner cleaning apparatus. It is easy to use with a specially designed stainless knife. It cleans off welding seams in either hot or cold condition. It can clean the inner corner seams after welding. It has a 22,000 RPM motor, and is featured to cut from end point and side surface. Extra blades are optional. It can have an inscription of your contact information to give away as a gift. It weighs 0.8 kg (1.8 lb) and measures 8 x 7 x 25 cm (3” x 3” x 10”). It has an air pressure of 6-8 bar (90-120 psi).

Easy to use with specially designed stainless knife.
Cleans off welding seams in hot or cold condition.
Cleans inner corner seams after welding.
Has a 22000 rpm motor featured to cut from end point and side surface.
Cleans inner sections of the seams very easily

Hand tool
1 router bit

Extra blades, per piece
Can be inscripted with your contact information to give away as a gift

 Weight = 0.8 kg (1.8 lb)
LWH = 8 x 7 x 25 cm   (3” x 3” x 10”)
Air = 6-8 bar (90-120 psi)

Technical specifications and features are subject to change without prior notice.